分別是熄燈前脫硫、熄燈中脫硫和熄燈后脫硫。 其中一般使用石灰石停止使用脫硫的方法，所以今天的恒能就集中在其中使用的江蘇生物脫硫設備吧。
They are desulfurization before turning off the light, desulfurization during turning off the light, and desulfurization after turning off the light. Among them, limestone is generally used to stop using desulfurization methods, so today's Hengneng will focus on the Jiangsu biological desulfurization equipment used in it.
生物脫硫設備的原理是將石灰石加水成漿，它能阻止煙氣中的二氧化硫和氧化反響，生成硫酸鈣。 經過不斷的反響，硫酸鈣達到一定的飽和度后，就構成了結晶二水石膏。 然后停止這些石膏的脫水處理，堆放在石膏儲藏室。 生物脫硫后的煙氣經過除霧器和換熱器后，可通過煙囪排入大氣，經脫硫設備處理的煙氣脫硫效率可達95%。
The principle of biological desulfurization equipment is to add limestone to water to form a slurry, which can prevent sulfur dioxide and oxidation reactions in flue gas, generating calcium sulfate. After continuous reflection, calcium sulfate reaches a certain saturation, forming crystalline dihydrate gypsum. Then stop the dehydration treatment of these gypsum and stack them in the gypsum storage room. The flue gas after biological desulfurization can be discharged into the atmosphere through the chimney after passing through the mist eliminator and heat exchanger. The desulfurization efficiency of the flue gas treated by the desulfurization equipment can reach 95%.
這種脫硫方法如此方便，除了自身的脫硫原理外，還需要高質量的脫硫設備，為了更好地發揮脫硫效果，生物脫硫設備需要一定的耐腐蝕性，理由如下：
This desulfurization method is so convenient. In addition to its own desulfurization principle, high-quality desulfurization equipment is also required. In order to better utilize the desulfurization effect, biological desulfurization equipment needs a certain degree of corrosion resistance, for the following reasons:
1 .化學腐蝕，主要是指煙道中有腐蝕性的介質在一定溫度下與金屬設備發生化學反響，生成可溶性鐵鹽，隨時間的推移對設備產生腐蝕作用。
1. Chemical corrosion mainly refers to the chemical reaction between corrosive media in the flue and metal equipment at a certain temperature, generating soluble iron salts that corrode the equipment over time.
2 .電化學腐蝕，這主要是指金屬設備外表含水和電解質時，外表構成一次電池，產生電流，經過一段時間也會產生腐蝕作用。
2. Electrochemical corrosion refers to the formation of a primary battery on the surface of metal equipment containing water and electrolytes, which generates current and can also cause corrosion after a period of time.
3 .磨損腐蝕，主要是指煙道中殘留固體顆粒，這些顆粒會停止與生物脫硫設備外表的摩擦，不時更新外表，加速與設備外表的腐蝕過程，使設備外表變薄。
3. Wear and corrosion mainly refers to the residual solid particles in the flue, which will stop friction with the surface of the biological desulfurization equipment, update the surface from time to time, accelerate the corrosion process with the equipment surface, and make the equipment surface thinner.
由此可見，江蘇生物脫硫設備的生產必須關注設備防腐性能的設計，這一環節在整個生物脫硫過程中也起著重要的作用。
It can be seen that the production of Jiangsu biological desulfurization equipment must pay attention to the design of equipment anti-corrosion performance, which also plays an important role in the entire biological desulfurization process.
This article is dedicated to the friendship of biological desulfurization. For more relevant knowledge, please click on: http://www.851323.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
魯公網安備37011202000764號號 網站地圖XMLTXT
企業二維碼
2023-05-11
